| Model | STR73D | STR700 SmartLine Remote Diaphragm Seals |
| Number of Seals | 2 | 2 Remote Seals |
| Primary Fill Fluid (Meter body) | 1 | Silicone Oil 200 |
| Construction: Dual Head DP | C | Non-Wetted Adapter Head Materials: 316 SS (bolt-on heads) |
| Bolts and Nuts for Transmitter Heads | S | 316 SS Bolts and Nuts |
| Secondary Fill Fluid (capillary & seal)** | 3 | Silicone Oil 704 |
| Connection of Remote Seal to Meter Body** | E | Capillary Length: 25 feet (7.5 m), SS Armor |
| Seal Option** | 0 | None |
| Flush Flanged Seal** | (YYY) |
|
| Wetted Material | AA | Diaphragm: 316L SS
Upper Insert: 316L SS |
| Non-Wetted Material (upper) | 2 | 316L SS |
| Seal-Capillary Connection | 1 | Center Seal |
| Calibration Rings | B | 316L SS |
| Flushing Connections and Plugs(1) | S | Two 1/2" with metal plugs |
| Approvals | A | FM Explosion proof, Intrinsically Safe, Non-incendive, & Dustproof |
| Electronic Housing Material & Connection Type | E | Material: 316 Stainless Steel (Grade CF8M)
Connection: 1/2 NPT
Lightning Protection: None |
| Output/ Protocol | F | Analog Output: none
Digital Protocol: Foundation Fieldbus |
| Customer Interface Selections | B | Indicator: Basic
Ext Zero, Span & Config Buttons: None
Languages: English |
| Application Software | 1 | Standard Diagnostics |
| Output Limit, Failsafe & Write Protect Settings | 6 | Write Protect: Disabled
Fail Mode: N/A
High & Low Output Limits(2): N/A Fieldbus |
| General Configuration | S | Factory Standard |
| Accuracy and Calibration | A | Accuracy: Standard
Calibrated Range: Factory Std
Calibration Qty: Single Calibration |
| Mounting Bracket | 1 | Bracket Type: Angle Bracket
Material: Carbon Steel |
| Customer Tag | 1 | One Wired Stainless Steel Tag (Up to 4 lines 26 char/line) |
| Unassembled Conduit Plugs & Adapters | A0 | No Conduit Plugs or Adapters Required |
| (Y=900) |
|
Your cart is empty
