Part Number: EJA210E-DMS5G-910DN-WJ13B2TW00-B/D4/HEModel: EJA210E Flange Mounted Differential Pressure Transmitter
Manufacturer: Yokogawa
Condition: New & Original in Factory Packing
Factory Warranty: 12 Months
Ordering Information
Model | EJA210E | Flange mounted differential pressure transmitter |
Output signal | -D | 4 to 20 mA DC with digital communication (BRAIN protocol) |
Measurement span (capsule) | M | 1 to 100kPa (4 to 400 inH2O) |
Low pressure side wetted parts material | S# | [Cover flange and process connector] ASTM CF-8M(1) [Capsule] Hastelloy C-276(2) (Diaphragm); F316L SST, 316L SST (Others) [Capsule gasket] Teflon-coated 316L SST [Drain/Vent plug] 316 SST |
Low pressure side Process connections | 5 | without process connector (1/4 NPT female on the cover flange) |
Coverflange bolts and nuts material | G | 316L SST |
Installation | -9 | Horizontal piping type and left side high pressure |
Amplifier housing | 1 | Cast aluminum alloy |
Electrical connection | 0 | G 1/2 female, one electrical connection without blind plugs |
Integral indicator | D | Digital indicator(3) |
| N | Always N |
Process connection style | -W | Flush type |
Flange rating | J1 | JIS 10K |
Flange size | 3 | 3-inch (80mm) |
Flange material | B | 316 SST(4) |
Gasket contact surface(5) | 2 | Flat (no serration) |
Wetted parts material (high pressure side)(6) | TW | [Diaphragm] Tantalum(2) [Others] Tantalum(2) |
Flushing connection ring(7) | 0 | [Ring] None [Vent/Drain plugs] - [Material] - |
Extension | 0 | None |
Fill fluid | ?-B | For general use (Silicone oil) [Process temperature](8) ?C40 to 120??C [Ambient temperature] ?C40 to 85??C |
Calibration units(9) | /D4 | M calibration (kgf/cm2 unit) |
Fluoro-rubber O-ring | /HE | All O-rings of amplifier housing. Lower limit of ambient temperature: ?C15??C (5??F) |
The ????? marks indicate the most typical selection for each specification.
- Cast version of 316 SST. Equivalent to SCS14A.
- Not applicable for flashing connection ring code A and B.
- Not applicable for output signal code G.
- Forged version of the material may be used.
- See Table 3 ??Gasket contact surface?? on Page 5.
- Users must consider the characteristics of selected wetted parts material and the influence of process fluids. The use of inappropriate materials can result in the leakage of corrosive process fluids and cause injury to personnel and/or damage to plant facilities. It is also possible that the diaphragm itself can be damaged and that material from the broken diaphragm and the fill fluid can contaminate the user??s process fluids.
Be very careful with highly corrosive process fluids such as hydrochloric acid, sulfuric acid, hydrogen sulfide, sodium hypochlorite, and high-temperature steam (150??C [302??F] or above). Contact Yokogawa for detailed information of the wetted parts material. - When specified flushing connection ring code A or B, exclusive gasket is provided for transmitter side.
- Indicates the process temperature limit of high pressure side.
The process temperature limit for low pressure side is ?C40 to 120??C except fill fluid code -D. - The unit of MWP (Max. working pressure) on the name plate of a housing is the same unit as specified by option code D1, D3, and D4.
- Estimated Lead Time: 12 - 18
- Shipping Weight: 10 Kg