Your cart is empty

New Products - more

EF8308C041F New ASCO 3/8 3 Way Brass

$3,235.00 $1,925.00
Save: 40% off

19000008 24VDC New ASCO Solenoid Valves

$179.00 $106.00
Save: 41% off

8223G012 New ASCO High Pressure Solenoid Valves

$660.00 $393.00
Save: 40% off

Reviews - more

Write a review on this product.

Information

Home :: Rosemount Transmitter :: EJA110E-JMS5G-919DB/X2/D4/M01/T12/KU22/HART5 New Yokogawa EJA110E Differential Pressure Transmitter

Product 688/1465

Return to the Product List

EJA110E-JMS5G-919DB/X2/D4/M01/T12/KU22/HART5 New Yokogawa EJA110E Differential Pressure Transmitter

$1,998.00 $979.00
Save: 51% off

Part Number: EJA110E-JMS5G-919DB/X2/D4/M01/T12/KU22/HART5

Model: EJA110E Differential Pressure Transmitter

Brand: Yokogawa

Condition: New & Original in Factory Packing

Factory Warranty: 12 Months

EJA110E features include:

0.055% Accuracy (0.04% Accuracy optional)
0.1% Stability per 10 years
90 ms Response Time
Exida and TUV SIL 2 / SIL3 Certified
MWP 2,300 psi (MWP 3,600 psi option)
Local Parameter Setting (LPS)

Model and Suffix Codes

Model	EJA110E	Differential pressure transmitter
Output signal	-J	4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)⁽¹⁾
Measurement span (capsule)	M	1 to 100 kPa (4 to 400 inH₂O)
Wetted parts material⁽²⁾	S^#	Cover flange and process connector: ASTM CF-8M⁽³⁾
Process connections	*5	without process connector (1/4 NPT female on the cover flanges)
Bolts and nuts material	G	316L SST
Installation	*-9	Horizontal piping and left side high pressure
Amplifier housing	1	Cast aluminum alloy
Electrical connection	9	M20 female, two electrical connections and a blind plug⁽⁴⁾
Integral indicator	D	Digital indicator⁽⁵⁾
Mounting bracket	*B	304 SST 2-inch pipe mounting, flat type (for horizontal piping)
Painting	/X2	Coating change: Coating change⁽⁶⁾⁽⁷⁾
Calibration units⁽⁸⁾	/D4	M calibration (kgf/cm² unit)
Material certificate⁽⁹⁾	/M01	Cover flange⁽¹⁰⁾
Pressure test/Leak test certificate⁽¹¹⁾	/T12	Test Pressure: 16 MPa(2300 psi) Nitrogen(N2) Ga⁽¹²⁾
ATEX	/KU22	Combined KF22, KS21 and ATEX Intrinsically safe Ex ic^(13)(14) [ATEX Intrinsically safe Ex ic] Applicable Standard: EN 60079-0:2012, EN 60079-11:2012 II 3G Ex ic IIC T4 Gc, Amb. Temp.: ?C30 to 60??C (?C22 to 140??F)⁽¹⁵⁾ Ui=30 V, Ci=27.6 nF, Li=0 ??H
	/HART5

The ??*?? marks indicate the most typical selection for each specification.

HART 5 or HART 7 is selectable. Specify upon ordering
Users must consider the characteristics of selected wetted parts material and the influence of process fluids. The use of inappropriate materials can result in the leakage of corrosive process fluids and cause injury to personnel and/or damage to plant facilities. It is also possible that the diaphragm itself can be damaged and that material from the broken diaphragm and the fill fluid can contaminate the user??s process fluids.
Be very careful with highly corrosive process fluids such as hydrochloric acid, sulfuric acid, hydrogen sulfide, sodium hypochlorite, and high-temperature steam (150??C [302??F] or above). Contact Yokogawa for detailed information of the wetted parts material.
Cast version of 316 SST. Equivalent to SCS14A.
Material of a blind plug is aluminum alloy or 304 SST.
Not applicable for output signal code G.
Not applicable for amplifier housing code 2 and 3.
Not applicable with color change option.
The unit of MWP (Max. working pressure) on the name plate of a housing is the same unit as specified by option codes D1, D3, and D4.
Material traceability certification, per EN 10204 3.1B.
Applicable for process connections codes 0 and 5.
The unit on the certificate is always Pa unit regardless of selection of option code D1, D3 or D4
Pure nitrogen gas is used for oil-prohibited use (option codes K1, K2, K5, and K6).
Applicable for Electrical connection code 2, 4, 7, 9, C and D.
Not applicable for output signal code Q.
Lower limit of ambient temperature is ?C15??C (5??F) when option code HE is specified.

Estimated Lead Time: 8 - 9
Shipping Weight: 5 Kg

Add to Cart: