Your cart is empty

$378.00 $225.00
Save: 40% off

$311.00 $185.00
Save: 41% off

$302.00 $180.00
Save: 40% off

Home :: Rosemount Transmitter :: EJA110E-JMS5G-919DB/KS21/M01 New Yokogawa EJA110E Differential Pressure Transmitter

Product 685/1465

EJA110E-JMS5G-919DB/KS21/M01 New Yokogawa EJA110E Differential Pressure Transmitter

$1,998.00 $979.00
Save: 51% off

Part Number: EJA110E-JMS5G-919DB/KS21/M01

Model: EJA110E Differential Pressure Transmitter

Manufacturer: Yokogawa

Condition: New & Original in Factory Packing

Factory Warranty: 12 Months

EJA110E features include:

Model	EJA110E	Differential pressure transmitter
Output signal	-J	4 to 20 mA DC with digital communication (BRAIN protocol)⁽¹⁾
Measurement span (capsule)	M	1 to 100 kPa (4 to 400 inH2O)
Wetted parts material⁽²⁾	S^#	Cover flange and process connector: ASTM CF-8M⁽³⁾Capsule: Hastelloy C-276⁽⁴⁾ (Diaphragm), F316L SST, 316L SST (Others) Capsule gasket: Teflon-coated 316L SST Vent/Drain plug: 316 SST
Process connections	5	without process connector (1/4 NPT female on the cover flanges)
Bolts and nuts material	G	316L SST
Installation	-9	Horizontal piping and left side high pressure
Amplifier housing	1	Cast aluminum alloy
Electrical connection	9	M20 female, two electrical connections and a blind plug⁽⁴⁾
Integral indicator	D	Digital indicator⁽⁵⁾
Mounting bracket	B	304 SST 2-inch pipe mounting, flat type (for horizontal piping)
ATEX	/KS21	ATEX Intrinsically safe Approval⁽⁶⁾⁽⁷⁾Applicable Standard: EN 60079-0:2012/A11:2013, EN 60079-11:2012, EN 60079-26:2007 Certificate: DEKRA 11ATEX0228 X II 1G, 2D Ex ia IIC T4 Ga, Ex ia IIIC T85??C T100??C T120??C Db Degree of protection: IP66/IP67 Amb. Temp. (Tamb) for EPL Ga: ?C50 to 60??C (?C58 to 140??F) Maximum Process Temp. (Tp) for EPL Ga:120??C Electrical data: Ui=30 V, Ii=200 mA, Pi=0.9 W, Ci=27.6 nF, Li=0 ??H Amb. Temp. for EPL Db: ?C30 to 60??C⁽⁸⁾ Max. surface Temp. for EPL Db: T85??C (Tp: 80??C), T100??C (Tp: 100??C), T120??C (Tp: 120??C)
Material certificate⁽⁹⁾	/M01	Cover flange⁽¹⁰⁾

The ??*?? marks indicate the most typical selection for each specification.

HART 5 or HART 7 is selectable. Specify upon ordering.
Users must consider the characteristics of selected wetted parts material and the influence of process fluids. The use of inappropriate materials can result in the leakage of corrosive process fluids and cause injury to personnel and/or damage to plant facilities. It is also possible that the diaphragm itself can be damaged and that material from the broken diaphragm and the fill fluid can contaminate the user??s process fluids.
Be very careful with highly corrosive process fluids such as hydrochloric acid, sulfuric acid, hydrogen sulfide, sodium hypochlorite, and high-temperature steam (150??C [302??F] or above). Contact Yokogawa for detailed information of the wetted parts material.
Cast version of 316 SST. Equivalent to SCS14A.
Material of a blind plug is aluminum alloy or 304 SST.
Not applicable for output signal code G.
Applicable for Electrical connection code 2, 4, 7, 9, C and D.
Not applicable for output signal code Q.
Lower limit of ambient temperature is ?C15??C (5??F) when option code HE is specified.
Material traceability certification, per EN 10204 3.1B.
Applicable for process connections codes 0 and 5.

Add to Cart: