Type: 646Model: 646 I/P Transducer - 646 Electro-Pneumatic Transducer
Manufacturer: Fisher
Condition: New & Original in Factory Packing
Factory Warranty: 12 Months
The Fisher 646 electro-pneumatic transducer uses a converter module that converts a 4 to 20 milliampere input signal to a proportional 0.2 to 1.0 bar (3 to 15 psig) pneumatic output signal. The converter module uses small parts of minimum mass, which are balanced symmetrically around a pivot point at the center of the mass. This balanced arrangement results in a high performance instrument that reduces sensitivity to vibration.
Features
- The small size and light-weight design of the transducer facilitate mounting and provide improved space utilization.
- The transducer, used in a standard valve/actuator mounted application, exhibits an output shift of less than 1 percent of span when tested to SAMA Standard PMC 31.1, Condition 3.
- The output volume of the transducer is adequate to drive valve/actuator combinations without requiring a positioner or volume booster.
- The transducer has low air consumption, which lowers operating costs.
- Modular design of the converter allows easy replacement in the field for reduced maintenance costs.
- The accuracy, linearity, and frequency response coupled with minimal hysteresis far exceed the requirements of most control systems.
Specifications
| Area Classification |
Explosion Proof, Intrinsically Safe, Non-incendive, General Purpose, Flame Proof |
| Certifications |
CSA, FM, ATEX, IECEx, CUTR, Regional |
| Communication Protocol |
4-20mA Analog |
| Data Interface |
Wired |
| Diagnostics |
No |
| Input Signal |
Electric |
| Max Outlet Pressure |
20 psig |
| Mounting Type |
Remote Mount, Actuator Mount |
| Operating Temperature |
Standard Temperature |
| Position Control |
Modulating Control |
| Power Source |
Local |
| Supply Media |
Air |
- Availability: In Stock
- Estimated Lead Time: Usually Ships in 10 Working Days
- Shipping Weight: 4 Kg
Your cart is empty
