| Model |
5301 |
Guided Wave Radar Liquid Level or Interface Transmitter (interface available for fully submerged probe) |
| Signal output |
H |
4-20 mA with HART communication (default output from factory is HART 5, add option code HR7 for HART 7) |
| Housing material |
A |
Polyurethane-covered Aluminum (Aluminum alloy A360, maximum 0.6 percent Cu) |
| Conduit / cable threads |
2 |
M20 x 1.5 adapter |
| Operating temperature and pressure |
S |
Design and operating temperature:
-40 to 302 ??F (-40 to 150 ??C)
-15 to 580 psig (-1 to 40 bar)
|
| Material of construction: Process connection / probe |
1 |
316/316L/EN 1.4404 |
| Sealing O-ring material |
V |
Fluoroelastomer (FKM) |
| Probe type |
4A |
Description: Rigid Single Lead (8 mm)
Process connections: Flange / 1- in.(1), 1?-in., 2- in.(1) Thread / Tri Clamp
Probe lengths: Min: 1 ft. 4 in. (0.4 m), Max: 9 ft. 10 in. (3 m)
|
| Probe length units |
M |
Metric (meters, centimeters) |
| Total probe length (feet/m) |
002 |
|
| Total probe length (inch/cm) |
00 |
|
| Process connection - size / type |
BA |
3-in. Class 150, RF (Raised Face Type) |
| Hazardous locations certifications |
E1(2) |
ATEX Flameproof |
| Display |
M1 |
Integral digital display |
| Special quality assurance
|
Q4 |
Calibration data certificate |
| Material traceability certification |
Q8 |
Material traceability certification consistent with ISO10474-3.1:2013 / EN10204-3.1:2004 |
| Special quality assurance |
Q4 |
Calibration data certificate |
| Material traceability certification |
Q8 |
Material traceability certification consistent with ISO10474-3.1:2013 / EN10204-3.1:2004 |
| Safety certifications |
QT |
Safety-certified to IEC 61508 with certificate of FMEDA data. Only available with HART 4-20 mA output (output
code H). |
| Overfill prevention |
U1 | Overfill prevention according to WHG/TUV |
|
|
|
Your cart is empty
