Part Number: STG74S-E1G000-1-0-CHT-11C-B-30A6-F1,FX,TP-0000Model: STG74S SmartLine Gauge Pressure Transmitter
Brand: Honeywell
Condition: New & Original in Factory Packing
Factory Warranty: 12 Months
Ordering Information
| Model | STG74S | Gauge In-Line Pressure Transmitter |
| Process Head & Diaphragm Materials | E | Process Head/Reference Head Material:(1) 316 Stainless Steel
Barrier Diaphragm Material: 316L SS, Hastelloy C - 276 |
| Fill Fluid | 1 | Silicone Oil 200 |
| Process | G | Size/Type: 1/2" NPT (female)
Material: Same as Process Head(2) |
| Bolt/Nuts Materials | 0 | None |
| Vent/Drain Type/Location | 0 | Head Type: None
Vent Type: None
Location: None
Vent Material: None |
| Gasket Materials | 0 | None |
| Head/Connect Orientation | 1 | Meter Body: Standard
High Side Left, Ref Side Right(3) / Std Head Orientation |
| Approvals | 0 | No Approvals Required |
| Electronic Housing Material & Connection Type | C | Material: Polyster Poweder Coated Aluminum
Connection: 1/2 NPT
Lighting Protection: Yes |
| Output/Protocol | H | Analog Output: 4-20mA dc
Digital Protocol: HART Protocol |
| Customer Interface Selections | T | Indicator: Standard(w/Internal
Zero,Span&Config
buttons)
Ext Zero, Span & Config Buttons: Yes
Languages: EN |
| Application Software | 1 | Diagnostics: Standard Diagnostics |
| Output Limit, Failsafe % Write Protect Settings | 1 | Write Protect: Disabled
Fail Mode: High> 21.0mAdc
High & Low Output Limits:(4) Honeywell Std (3.8 - 20.8 mAdc) |
| General Configuration | C | Custom Configuration (Unit Data Required from customer) |
| Accuracy & Calibration | B | Accuracy: Standard
Calibrated Range: Custom (Unit Data Required)
Calibration Qty: Single Calibration |
| Mounting Bracket | 3 | Bracket Type: Angle Bracket
Material: 316 SS |
| Customer Tag | 0 | No customer tag |
| Unassembled Conduit Plugs & Adapters | A6 | 1/2 NPT 316 SS Certified Conduit Plug |
| Certifications & Warranty | F1
FX
TP | Calibration Test Report & Certificate of Conformance
EN10204 Type 3.1 Material Traceability
Over-Pressure Leak Test Certificate (1.5X MAWP) |
| Factory | 0000 | Factory Identification |
- Reference head available with Dual Head Gage models only. In-Line Gage models are supplied with Process Head only.
- STG735,745,775 supplied via 1/2" flange adapter same material as process head except carbon steel shall use 316 SS
- Left side/Right side as viewed f rom the customer connection perspective
- NAMUR Output Limits are configurable by customer
- Estimated Lead Time: 12 - 18
- Shipping Weight: 10 Kg
Your cart is empty
