| Model | STR735D | SmartLine Pressure Transmitter with Remote Diaphragm Seals |
| Number of Seals | 2 | 2 Remote Seals |
| Primary Fill Fluid (Meter body) | 1 | Silicone Oil 200 |
| Dual Head DP | C | 316 SS (bolt-on heads) |
| Bolts and Nuts for Transmitter Heads | S | 316 SS Bolts and Nuts |
| Secondary Fill Fluid (capillary & seal)** | 1 | Silicone Oil 200 |
| Connection of Remote Seal to Meter Body** | E | Capillary Length: 25 feet (7.5m), SS Armor |
| Seal Option** | 0 | None |
| Flush Flanged Seal with Lower** | (YYY) |
|
| Wetted Material | AA | Diaphragm: 316L SS
Upper Insert: 316L SS |
| Non-Wetted Material (upper, upper insert) | 2 | 316L SS
|
| Seal-Capillary Connection | 1 | Center Seal |
| Calibration Rings | B | 316L SS |
| Flushing Connection and Plugs(2) | S | Two 1/2" with metal plugs |
| Approvals | A | FM Explosion proof, Intrinsically Safe, Non-incendive, & Dustproof |
| Electronic Housing Material & Connection Type | E | Material: 316 Stainless Steel (Grade CF8M)
Connection: 1/2 NPT
Lightning Protection: None |
| Output/ Protocol | H | Analog Output: 4-20mA dc
Digital Protocol: HART Protocol |
| Customer Interface Selections | S | Indicator: Standard (w/internal Zero, Span & Conf Buttons)
Ext Zero, Span & Config Buttons: None
Languages: EN, RU |
| Application Software | 1 | Standard Diagnostics |
| Output Limit, Failsafe & Write Protect Settings | 1 | Write Protect: Disabled
Fail Mode: High> 21.0mAdc
High & Low Output Limits(3): Honeywell Std (3.8 - 20.8 mAdc) |
| General Configuration | S | Factory Standard |
| Accuracy and Calibration | A | Accuracy: Standard
Calibrated Range: Factory Std
Calibration Qty: Single Calibration |
| Mounting Bracket | 1 | Bracket Type: Angle Bracket
Material: Carbon Steel |
| Customer Tag | 1 | One Wired Stainless Steel Tag (Up to 4 lines 26 char/line) |
| Unassembled Conduit Plugs & Adapters | A0 | No Conduit Plugs or Adapters Required |
| (Y=600) | |
Your cart is empty
