Model: RX3i DC Voltage Output Module
Manufacturer: GE Fanuc
Condition: New & Original in Factory Packing
Factory Warranty: 12 Months
Specifications
Rated Voltage: 12/24 volts DC, nominal
Output Voltage Range: 10.2 to 30 volts DC
Outputs per Module: 32 (two isolated groups of 16 outputs each)
Isolation:
Field to Backplane (optical) and to Frame Ground: 250 VAC continuous; 1500 VAC for 1 minute
Group to Group: 250 VAC continuous; 1500 VAC for 1 minute
Module ID: 0x059h
Output Current: 0.75 Amps per point
Power Consumption: 300 mA (maximum) from 5 volt bus on backplane;
Thermal Derating: No derating at 24VDC. At 30VDC, outputs are derated above 42 degrees C as shown below.
External Power Supply: +12 VDC to +30 VDC, 12/24 VDC nominal
External Power Supply Current Required (not including load current):
Module version CC and later: 72 mA/group with all outputs commanded Off, 132 mA/group with all outputs commanded ON
Module version BC and earlier: 72 mA/group with all outputs commanded OFF, 100 mA/group with all outputs commanded ON
Output Characteristics
Inrush Current: 3 Amps supplied for 10ms without ESCP trip
Output Voltage Drop: 0.3 volt DC maximum
Steady-state overcurrent trip: 5 Amps typical per point
Output Leakage Current: 0.1mA maximum
On Response Time: 0.5ms maximum
Off Response Time: 0.5ms maximum
Protection: Short-circuit protection, overcurrent protection, overtemperature protection, all with auto recovery.
- Availability: In Stock
- Estimated Lead Time: Usually Ships in 7 - 10 Working Days
- Shipping Weight: 3 Kg
Your cart is empty
