| Model |
5301 |
Guided Wave Radar Liquid Level or Interface Transmitter (interface available for fully submerged probe) |
| Signal output |
H |
4-20 mA with HART communication (default output from factory is HART 5, add option code HR7 for HART 7) |
| Housing material |
A |
Polyurethane-covered Aluminum (Aluminum alloy A360, maximum 0.6 percent Cu) |
| Conduit / cable threads |
1 |
? - 14 NPT, 1 plug included |
| Operating temperature and pressure |
H(1)(2) |
Design and operating temperature:
-76 to 752 ??F (-60 to 400 ??C)
-15 to 5000 psig (-1 to 345 bar) |
| Material of construction: Process connection / probe |
1 |
316/316L/EN 1.4404 |
| Sealing O-ring material |
N(3) |
None |
| Probe type |
4A |
Description: Rigid Single Lead (8 mm)
Process connections: Flange / 1- in.(4), 1?-in., 2- in.(4) Thread / Tri Clamp
Probe lengths: Min: 1 ft. 4 in. (0.4 m), Max: 9 ft. 10 in. (3 m)
|
| Probe length units |
M |
Metric (meters, centimeters) |
| Total probe length (feet/m) |
001 |
|
| Total probe length (inch/cm) |
58 |
|
| Process connection - size / type |
CB |
4-in. Class 300, RF (Raised Face Type) |
| Hazardous locations certifications |
NA |
No Hazardous Locations Certifications |
| Display |
M1 |
Integral digital display |
| Hydrostatic testing |
P1 |
Hydrostatic testing, including certificate |
| Factory configuration |
C1 |
Factory configuration per Configuration Data Sheet |
| Special quality assurance |
Q4 |
Calibration data certificate |
| Material traceability certification |
Q8 |
Material traceability certification consistent with ISO10474-3.1:2013 / EN10204-3.1:2004 |
| Centering discs |
S3(5) |
Description: 3-in. Centering disc
Outer diameter: 2.7 in. (68 mm) |
|
SW2 |
|
|
J0 |
|
Your cart is empty
