Your cart is empty

$179.00

$89.00

$5.90

Home :: PLC & DCS :: 1756-IR6I New Allen Bradley Temperature-Measuring Analog Module

Product 405/5333

1756-IR6I New Allen Bradley Temperature-Measuring Analog Module

$1,300.00 $620.00
Save: 52% off

Part Number: 1756-IR6I

Model: Temperature-Measuring Analog Module

Manufacturer: Allen Bradley

Condition: New & Original in Factory Packing

Factory Warranty: 12 Months

Technical Specifications

Inputs: 6 individually isolated RTD
Input range:
1??87 O
2??000 O
4??000 O
8??000 O
Resolution:
16 bits
1??87 O: 7.7 mO/bit
2??000 O:15 mO/bit
4??000 O:30 mO/bit
8??020 O:60 mO/bit
Current draw @ 5.1V: 250 mA
Current draw @ 24V: 125 mA
Total backplane power: 4.25 W
Power dissipation, max: 4.3 W
Thermal dissipation: 14.66 BTU/hr
Channel bandwidth: 15 Hz?
Settling time: <80 ms to 5% of full scale?
Calibrated accuracy @ 25 ?C: Better than 0.1% of range
Calibration interval: 6 months
Offset drift: 10 MO/?C
Gain drift with temperature, nom: 50 ppm/?C
Gain drift with temperature, max: 90 ppm/?C
Module error: 0.54% of range
Module scan time:
25 ms min floating point (ohms)
50 ms min floating point (temperature)
10 ms min integer (ohms)?
Data format: Integer mode (left justified, 2s complement) IEEE 32-bit floating point
Module conversion method: Sigma-Delta
Isolation voltage:
50V (continuous), basic insulation type, input channels-to-backplane, and input channel-to-channel
Routine tested at 1350V AC for 2 s
Module keying: Electronic, software configurable
RTB keying: User-defined mechanical
Slot width: 1
Wire category: 2?
North American temperature code: T4A
IEC temperature code: T4
Enclosure type: None (open-style)

NOTE:

Notch filter dependent.
Use this conductor category information for planning conductor routing as described in the system-level installation manual.

Add to Cart: